Our new 5mm Super Slim Dotless COB LED Strip Light uses the new FCOB technology to produce seamless linear lighting with no hot spots or "dead spots" and is completely edgeless. On traditional LED strips, LED diodes are spaced apart creating hot spots that are visible when looking at the strip, but our Dotless LED strips give a consistent light throughout the entire length.

This Ultra Thin continuous LED strip light can be cut every 21mm for 12V and 42mm for 24V, allowing you to cut pieces to the exact length that you need based on your application. Our DC LED strip light consumes 3W per ft and shines 330 lumens per ft with 384 LEDs/m. Its size is 5 mm wide, allowing it to fit in most standard aluminum channels. Available in 5M (16.4 ft) Lengths.

This low voltage Dotless LED strip light is available in 3000K Warm White, 4000K Natural White, 6000K Cool White, Red, Golden Yellow, Green, Purple (Hot Pink), Blue, and Ice Blue Colors and illuminates at 90 CRI. This strip light is a suitable choice for a variety of applications including kitchen cabinet, closets, edges and stairs, balcony, party decoration, wedding etc and is Indoor Rated at IP30.

How to choose right power supply?

1. 1. The COB strip is around 10W/m, so for 5m (16.4FT) LED strip, it needs a 50W power supply. The power supply can be bigger (60W, 100W, 200W are all ok), but can't be smaller, if the power supp is too small, the led strip will flash during working.
2. 2. Since there's voltage drop of the led strip, the real working power is much less than theoretical value. So it's ok that the power supply is a little smaller than the counted value.
3. 3. Recommended power supply (Linked Below):
   12V 16.4FT => 12V 5A adapter (or 12V 60W transformer)
   24V 16.4FT => 24V 3A adapter (or 24V 60W transformer)

12V/24V DC Low Voltage Transformer Required!

Compatible Controller and Remote: (Optional)

• WL5 - For App Control (Compatible with FUT007 Remote)
• MiLight FUT036 Controller and FUT007 Remote

Accessories:

• Connectors
• Wire

Looking for other Strip Lights? Check out Strip/Tape Light Collections. 

IMPORTANT NOTICE

1. The COB LED strip CAN NOT be connected to AC110V directly, must add a DC 12V/24V power supply.
2. The AC/DC transformer (power supply) and controller NOT included.
3. The COB strip is dimmable but need to add a suitable dimmer. Dimmer is NOT included.
4. The COB strip is jointed by 19.6IN-length pieces, so there are some jointed pointes on the COB strip, it's normal.
5. The actual power of the COB strip will be affected by the voltage drop. For example, the real using power of 16FT strip is around 30W, not 10W/mx5m= 50W (theoretical value). The calculation method of 50W is wrong, the voltage drop should be actually considered!
6. Please make sure the installing surface is clean + dry + smooth, or the COB strip cannot be pasted stably.
7. There will be Voltage Drop (the head of the led strip is brighter than the end) if the COB strip is too long. If you want to extend the COB strip to longer length (like 32.8FT or more), need to supply power to both ends of led strip.

Important Reminder:

Before proceeding with installation, please unroll and test the strip lights to confirm they are working correctly. This allows you to identify any potential issues beforehand, ensuring a hassle-free setup. If you experience any problems, don’t hesitate to reach out to our support team for assistance.

Recommendation for Long Runs:

For 12V DC strip light installations longer than 10M, we suggest powering the strip from both ends using an appropriate wire. This minimizes voltage drop, which can lead to uneven brightness or sections failing to light up. Proper power distribution ensures consistent and optimal illumination.

We provide eco friendly lights with customer friendly service. Our products are backed by our manufacturer's money-back guarantee, ensuring you receive a quality product free from defects. Feel free to contact us for any help or advice with this product!

Power: 3W/ Feet for 5mm and 3.4W/ft for 8mm 12V/24V DC FCOB
Light Color Temperature: 3000K Warm White, 4000K Natural White, 6000K Cool White, Red, Golden Yellow, Green, Purple, Blue, and Ice Blue Colors
Size: 5mm (W) x 16.4" (L)
Lumens: 330 lms per Feet
LED: 384 LED Chips/M
Board Width: 5 mm or 8 mm
Waterproof Rating: IP30
Beam Angle: 180°
CRI: 90
Life Span: 50,000 Hrs
Application: Walkways, Side Yards, loading docks, balconies, doorways, alleys, Path Lighting

- The cut off time for same day shipping is 2:00 PM (PST), excluding weekends and major holidays.

-All orders are shipped Free via Ground Shipping unless customer chooses Paid Expedited Shipping Options.

Shipping Times

• FedEx Ground: 1–5 business days within the contiguous U.S., 3–7 business days to and from Alaska and Hawaii.
• UPS Ground: 1–6 business days within the contiguous U.S., 3 business days to and from Alaska and Hawaii.
• USPS Priority Mail: Estimated 1-4 days based on origin, destination, and Post Office™ acceptance time.