Strip Light 12V/24V AC 0.75W/ft IP67 Outdoor Rated Dimmable Low Voltage Tape Light
Strip Light 12V/24V AC 0.75W/ft IP67 Outdoor Rated Dimmable Low Voltage Tape Light
Precio habitual
$121.99
Subscribe to get 10% off on your first purchase!
Specifications
• High Efficacy 0.75W Per Foot
• SAFE 12V/24V AC Low Voltage Power
• Available in 2700K, 3000K, or 4000K Color Temperatures
• 10mm Board Width
• Comes in 16 ft or 32 ft Lengths
• IP67 Outdoor Waterproof Rated
• Can be cut every Four inches
• FCC Compliant
** 12V AC Low Voltage Transformer Required! **
The new LED AC flexible Strip Light is rated IP67, which is perfect for outdoor lighting projects and can be directly connected to an existing 12V or 24V AC landscaping lighting system. As used CRI 90 high efficient LED chip, it can output great accent lighting for stairs, railing, and overhangs.
No more than 32' can be run in the same line. Having this said, for a 128' application, you would need to run 4 different lines of low-voltage wire. Even though the strip light can be cut every 2", we recommend only cutting each strip light once. Since there is a lead wire on each end, if you cut the strip light once, you end up with 2 shorter strip lights. If you want to cut the same strip light for a second time, you will need to use a connector (to give you lead wire to do the connection), which compromises the fixture & connection, and would not be covered by warranty. Having this said, if you have 4x 2' steps, we recommend using 2x 16 ft strip light.
No more than 32' can be run in the same line. Having this said, for a 128' application, you would need to run 4 different lines of low-voltage wire. Even though the strip light can be cut every 2", we recommend only cutting each strip light once. Since there is a lead wire on each end, if you cut the strip light once, you end up with 2 shorter strip lights. If you want to cut the same strip light for a second time, you will need to use a connector (to give you lead wire to do the connection), which compromises the fixture & connection, and would not be covered by warranty. Having this said, if you have 4x 2' steps, we recommend using 2x 16 ft strip light.
-How To Cut And Install Outdoor Led Strip Lights-
Ideal for Illuminating round steps, patio table cabinets, and more. Easy to Install, stick the strip light to a dry, clean surface for use. 3M Strong adhesives and strong clips ensure your light will not fall or hang. Trim the strip light to desirable lengths to satisfy your DIY home lighting needs.
Ideal for Illuminating round steps, patio table cabinets, and more. Easy to Install, stick the strip light to a dry, clean surface for use. 3M Strong adhesives and strong clips ensure your light will not fall or hang. Trim the strip light to desirable lengths to satisfy your DIY home lighting needs.
All low voltage outdoor lights must be installed with a 12V Low Voltage Transformer and connections between lights must be secured using Grease Filled Wire Nuts (WN12) waterproof connectors.
Specs & Features:
- Color Temperature: 2700K Soft White, 3000K Warm White, or 4000K Natural White
- Voltage: 12V / 24V AC
- Wattage: 0.75W per ft
- FCC Compliant
-
Waterproof: Yes IP67
- Dimmable: Yes
- Dimensions: 3/8” x 16’ or 32'
- Mounting: 3M Tape (make sure to clean the surface beforehand)
- It can be cut every 4 inches
- Max load: 32'
- Wiring: Wire lead on both ends
